Light Design - Rationale

Star Light Rationale

The light designed for this project is easy to manufacture, easy to assemble and fashionable. It consists of different sharpness and round edges to create a contrast in the geometry. The light bulb is positioned in the middle of the paper geometry and creates shadows on the floor and the roof of the place where the light is hanging from. The printed pattern inside the light makes the light look white when its off and have colored shapes on it when the light is turned on in the dark.

This light is easy to manufacture. It is made by cutting out two pieces of pentagon shapes out of the material which will have their edges attached together. The attachments can be made by any sort of glue which leaves the option for the product to be environmentally friendly open. It also uses most of each sheet of material during manufacture which minimizes the waste.

The assembly of this product is easily done. All that has to be done is the middle of the edges to be folded in and the light bulb to be inserted in. the assembly does not require any use of material or tools. This light also can be assembled on all sorts of lights including table lights and wall lights. This product also gives the consumer their own choice of light bulb due to the large size of it. The material will not change its shape over time and after numbers of assemble and de-assembling. Also the heat of the light will not effect the material because the minimum distance of the material to the light bulb is considered.